Arbejdsområde afladning

Features:

• 18 mil red laminated dissipative vinyl
• 3.0 m common point ground cord
• Large threaded grounding clip
• Adjustable wrist strap with integral coil cord
• Canvas carrying pouch

Order number	Size	Field Work Kit with Pouch
2350-80720	450 x 560 mm	Field work Kit

Features:

• Surface resistivity: 10¹¹ Ohms per ASTM-D257
• Offers storage and shipping protection
• Opens up flat to function as an ESD worksurface
• Included grounding strap
• Low charging, dissipative, shielding

Order number	Statshield ESD Workstation Pouch
2350-80740	15.2 x 20.3 cm
2350-80741	20.3 x 25.4 cm
2350-80742	25.4 x 33.0 cm
2350-80743	38.1 x 17.8 cm

Features:

• Recommended for homogeneous and multi-layer mats
• Snap is user installable
• Kit included a 10 mm socket, 10 mm stud, long screw, short screw, and ground label

Order number	Universal Snap Kit
2350-80014	Universal Snap Kit

Features:

• Recommended for multi-layer mats with a condictive inner layer
• Pronged 10 mm socket snap
• Push and clinch installation
• Includes ground label

Order number	Push and Clinch Snap pocket
2350-80008	Push and Clinch Snap kit

This high quality Alligator Clip will slip onto a banana plug allowing you to ground a cord wherever the clip can be attached.

Stacking snap banana jack provides a banana jack anywhere that has either a 10 mm snap stud (male) or a 10 mm snap socket (female). It also allows multiple attachment to the same grounding point.

Order number	Type
2350-60212	Alligator Clip
2350-60208	Stacking snap banana jack

Converts Socket to Stud ore opposite and Stud to Banana Jack

Features:

• Two banana jacks
• Either socket or ring terminal at end of cord
• Low profile
• Ring terminal versions have extra ring terminal included

Order number	EPA Bond Grounding Point for Bench Mat and two wrist Straps
2350-60348	Banana jack inputs, 10 mm mat stud, 4.5 m wire, ring terminal, 1 meg resistor
2350-60349	Banana jack inputs, 10 mm mat stud, 4.5 m wire, 10 mm socket, 1 meg resistor
2350-60361	Schrouded banana plug inputs, 10 mm mat stud, 4.5 m wire, ring terminal, 1 meg resistor

Features:

• Wrist strap parking station on unit
• Two 10 mm studs and banana jacks, dual input function
• Ring terminal at end of cord
• Mounts under the front edge of workstation
• Two Parking Studs
• Extra ring terminal included

Order number	Premium Bench Mounted Ground with Parking Station
2350-60354	3.0 m wire, 10 mm male snap adapters for banana jack ground connection point

Features:

• 10 mm female snap socket
• Ring terminal at end of cord
• Extra ring terminal included

Order number	Mat Ground Cord with 10 mm Socket
2350-60358	3.0 m wire, 10 mm socket, 1 meg resistor

Features:

• Designed to be mounted on under-side of benchtop or shelf
• Supplied with screws and spare ring terminal
• Black cord 3 m long, exists via strain relief on left
• Ultrasonically welded back cover prevents tampering
• Fitted with three 1MW 1Watt resistors
• 10 mm, banana and schrouded banana connectors

Order number	Euro Grounding Block
2350-52015	Euro Grounding Block

Features:

• Low profile
• 10 mm snap stud
• Either socket og ring terminal at end of cord
• Stud has threaded hole; 6-32 x 6.35 mm flat head screw and countersunk washer are provided
• Ring terminal version has extra ring terminal included

Order number	Floor & Table mat Ground Cord with 10 mm Stud
2350-60474	10 mm mat stud, 1 megohm resistor, 4.5 m wire, ring terminal
2350-60488	10 mm mat stud, 1 megohm resistor, 4.5 m wire, 10 mm socket

Features:

• Enables grounding through mains earth

Order number	Ground Bonding Point
2350-52000	Grounding point plug, U.K. version, 1x10 mm male snap, 1 meg resistor
2350-52010	Grounding point plug, Continental Shuko version, 1x10 mm male snap, 1 meg resistor